1
2
3
4
1
Abrasive belt
2
Tilting worktable
3
Worktable extension
4
Optional rollers
Request Information
Offices: COMMERCIAL – SPARE PARTS – ADMINISTRATION
LEVEL 150
Woodworking
sanding of solid wood
sanding of fibre panels
sanding of particle panels
sanding of plywood panels
Wood Sander LEVEL 150
Universal oscillating belt sander, extremely versatile and practical, aimed at joineries and diy woodworking.
Designed for sanding solid wood, fibre panels, particle panels and plywood panels.
Historically reliable machine in terms of efficiency and performance, now redesigned in a new model that, thanks to a new cutting-edge mechanical technology, is even more performing: a true excellence among sanders.
Advantages in wood sanding
STURDY STRUCTURE
Machine designed in a study structure to eliminate vibrations while finishing workpieces.
WORKTABLE TILTING
The worktable can be tilted by 45°, assuring a perfect sanding even for tilting profiles.
OSCILLATING BELT HANDLING
Abrasive belt oscillating handling on linear guides and ball runner blocks.
MOTOR AND GEARMOTOR FOR OSCILLATION
The movement of the oscillating belt occurs through dedicated motors and gearmotors.
SEPARATE MOTOR FOR SANDING
Dedicated motor for the sanding belt driving.
TWO BELT WORKING SPEEDS
Belt speed 12-24 m/sec.
IN COMPLIANCE WITH EU REGULATIONS
Compliance with EU regulations.
MACHINE BODY INTERNAL MANUFACTURING
Its base, and in general the whole machine body and part of the internal small metal parts are produced on site, with our own numeric control milling cutters.
In fact, Futura Woodmac works in synergy with Metalstar 2000 for any machining needs with its 3 departments: i.e. the sheet metal laser cutting, the welding and the numeric control milling cutters departments.
Worktable
Tilting worktable from 0° to 45° degrees by handwheel.
The tilting value can be detected on a digital protractor.
Separated Motors
Separated motors for sanding and belt oscillation.
A motor with a dedicated gearmotor for the belt oscillation management and another one for the sanding belt driving are fitted into the sander in the revision of the original project.
Supplementary Table for Woodworking with Rollers
Supplementary table and rubber rollers, ideal for sanding shaped wood.
The rollers are available with a 20-30-40-50 mm diameter.
Complete with ER32 collet chuck to install the rollers.
(optional)
Dust Suction
In addition to the supplementary table, a suction hood (suitably drilled to make it even more efficient) is available for dust suction.
(optional)
Pneumatic Tyre Roller
Upon request, the machine can be equipped with a 70 mm diameter pneumatic tyre roller with pressure air chamber.
(optional)
Worktable Extension
This is an extendable roller support for processing wide workpieces.
The 500 mm long extensions increase the worktable up to 750 mm from the sanding belt.
For fast processing, concealed hinges close the extensions, without removing them when not operating.
(optional)
Machine Handling
Level 150 can be moved by pallet truck, allowing easy handling within the factory.
LEVEL 150: Technical Layout and Overall Dimensions
Figure 1
LEVEL 150 (FRONT PLAN)
Figure 2
LEVEL 150 (SIDE PLAN)
Figure 3
LEVEL 150 (PLAN FROM ABOVE)
LEVEL 150: Technical and Optional Features
| ABRASIVE BELT WIDTH | 150 mm |
|---|---|
| ABRASIVE BELT LENGTH | 2170 mm |
| WORKTABLE LENGTH | 1440 mm |
| TWO WORKTABLES’ WIDTH | 750 mm |
| WORKTABLE TILTING | 0° – 45° |
| VERTICAL MOVEMENT OF THE OSCILLATING UNIT | 130 mm |
| VERTICAL OSCILLATION | 20 mm |
| BELT SPEED | 12-24 m/sec |
| BELT MOTOR POWER | 2.2 / 3.3 kW |
| DUST EXTRACTION OUTLET DIAMETER | 120 mm |
| NET WEIGHT | 416 kg |
Optional Features
| Worktable extension for wide workpieces |